How to Open Your Pool in the Spring
Start the Season Clean, Clear, and Swim-Ready
Spring in Charleston marks the return of warm days and backyard gatherings. A proper pool opening sets the tone for a worry-free swim season. Whether you closed your pool for winter or kept it on low maintenance, these steps will bring it back to full operation—safely and efficiently.
Step-by-Step Spring Opening Guide
- Remove and Clean the Cover
Carefully remove your winter cover and clean it thoroughly before storing. Avoid letting debris fall into the water. - Inspect Water Level and Equipment
Refill the pool to the middle of the skimmer if needed. Reconnect pumps, filters, heaters, and salt systems. Look for leaks or wear on o-rings and fittings. - Restore Power and Prime the System
Turn the system back on and prime the pump. Check for smooth startup and steady flow through all returns. - Clean and Circulate
Skim the surface, vacuum the floor, and brush walls. Run the filtration system continuously for 24–48 hours to clear winter cloudiness. - Test and Balance Chemistry
Adjust pH, alkalinity, chlorine (or salt), and stabilizer. Consider a professional water test for a clean start.
Shock the Pool
Eliminate any lingering contaminants with a chlorine shock. Wait until chlorine levels return to normal before swimming.
Let Heritage Pools Handle It
With over two decades of experience, Heritage Pools offers full-service spring openings—so your pool is clean, balanced, and ready before the first cannonball.
From concrete to fiberglass, I-Beam to luxury custom pools—we make spring startup simple.
Swim Here. Start Fresh.
